Handheld tester for essential safety and commissioning tests on PV systems up to 1500 V DC and 25 A, with I-V curve tracing.
| Open-circuit voltage | +10.0 to +1500 V DC · −10.0 to −440 V DC · 10.0 to 440 V AC |
|---|---|
| Short-circuit current | 0.50 to 25.00 A DC |
| Insulation resistance | 0.05 to 999 MΩ at 250 / 500 / 1000 / 1500 V |
| Earth continuity | 0.05 to 199 Ω, test current >200 mA |
| Operating current, via the clamp meter | 0.1 to 400 A DC |
| Operating power | 0.50 to 600 kW |
| I-V curve | minimum 20 test points, up to 1500 V DC and 25 A DC |
| I-V maximum power | 37.5 kW (panel efficiency ≤19%) · 20 kW (>19%) |
| Standards | IEC 61557-2 · IEC 61557-4 |
| Display | 3.5 in colour, 480 × 320 |
| Battery | 11.55 V 2930 mAh LiPo, rechargeable |
| Memory | 1000 slots |
| Weight | 1 kg |
| Dimensions | 265 × 115 × 78 mm |
This device is available for rent.
Rent this device
The smallest, lightest and fastest I-V curve tracer on the market. Up to 200 curves per hour on modules and strings, bifacial included, with every curve translated to standard test conditions (STC) on the spot.
Every minute, the E-Dust compares the full I-V curves of two identical modules, one kept clean and one left to soil like the plant, and returns the soiling ratio at the maximum power point, as defined in IEC 61724-1.
The E-Ref measures the short-circuit current and open-circuit voltage of a reference module of the same type as the plant's, and delivers irradiance and cell temperature to the SCADA by Modbus, with no further conversion. Versions for monofacial and bifacial modules.
