BiomedicalDatrend Systems Inc.
Automated electrical safety testing per IEC 62353, IEC 60601, AAMI/ANSI ES-1 and NFPA-99.
What we supply
Test equipment for biomedical engineering, electrical installations and solar PV systems.
Automated electrical safety testing per IEC 62353, IEC 60601, AAMI/ANSI ES-1 and NFPA-99.
Tests monophasic, biphasic and pulsed defibrillators, AEDs and pacers with 1% accuracy.
ESU analyzer covering IEC 60601-2-2, with built-in DSO and spectrum analyzer.
Modular patient simulation from ECG to CO2 breathing, SpO2 and NIBP.
Infutest SOLO and vPad-IVx the multi channels IDA "1 up to 6 channels"; both are the most advanced Infusion Device Analysers on the market today. vPad-IV conforms to all IEC 60601-2-24 test requirements for Infusion Pumps & Pump Controllers.
Meets IEC 60601-2-19, -2-20 and -2-21 for incubators, transport incubators and radiant warmers.
Compact analyzer for adult and neonatal ventilators and anaesthesia machines.
Loop, RCD, continuity, earth and EVSE tests in one instrument.
Tests EV charging stations: PE pre-test, PP and CP state simulation.
The smallest, lightest and fastest I-V curve tracer on the market. Up to 200 curves per hour on modules and strings, bifacial included, with every curve translated to standard test conditions (STC) on the spot.
Every minute, the E-Dust compares the full I-V curves of two identical modules, one kept clean and one left to soil like the plant, and returns the soiling ratio at the maximum power point, as defined in IEC 61724-1.
Phase rotation for 3-phase installations from 70 V to 1000 V AC, without contact.
The E-Ref measures the short-circuit current and open-circuit voltage of a reference module of the same type as the plant's, and delivers irradiance and cell temperature to the SCADA by Modbus, with no further conversion. Versions for monofacial and bifacial modules.
Handheld tester for essential safety and commissioning tests on PV systems up to 1500 V DC and 25 A, with I-V curve tracing.
Handheld tester for essential safety and commissioning tests on PV systems up to 1500 V DC and 25 A.
Heavy-duty handheld thermal camera: 256×192 IR resolution, −20 °C to 550 °C, IP65 and 2 m drop proof.
Clamp-on earth resistance, loop resistance and earth current testing, without disconnecting the ground lead or using auxiliary stakes.
